Реле GN025DSR Crouzet

Технические характеристики: • Three-phase Motor Reversing solid-state relay • Ratings from 25A and 50A per phase @ 48-530 VAC • SCR output for heavy industrial loads • DC control • LED input status indicator • UL508 Endurance Rating • UL/CSA/ TUV Approved, CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 25A 50A 4-32 VDC GN025DSR GN050DSR AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 25A 50A Operating Voltage (47-63Hz) [Vrms] 48-530 48-530 Maximum Load Current [Arms] (2) 25 50 Transient Overvoltage [Vpk] 1100 1100 Maximum Off-State Leakage Current @ Rated Voltage [mArms] (3) 6 6 Minimum Load Current [Arms] 0.1 0.1 Maximum Surge Current 50/60 Hz (1 cycle) [Apk] 475/500 710/750 1 Second Surge Current 50/60 Hz [Apk] 100 150 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.35 1.35 Maximum I²T for Fusing (50/60 Hz, 1/2 cycle) [A² sec] 1130/1030 2520/2320 Thermal Resistance Junction to Case (Rjc) [°C/W] 0.26 0.25 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (4) 500 500 HP Ratings at 120V / FLC 0.75 / 6.4A 1.5 / 12A HP Ratings at 240V / FLC 1 / 4.2A 3 / 9.6A HP Ratings at 480V / FLC 3 / 4.8A 7.5 / 11A HP Ratings at 600V / FLC 5 / 6.1A 10 / 11A INPUT SPECIFICATIONS (1) Description Parameters Control Voltage Range 4-32 VDC Minimum Turn-On Voltage 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC Minimum Input Current (for on-state) 23mA Maximum Input Current 35mA Input Resistance Current Regulated Maximum Turn-On Time [msec] 150 Maximum Turn-Off Time [msec] 1/2 Cycle Interlocking Time [msec] 100 GENERAL SPECIFICATIONS Description Parameters Input to Output Isolation 4000 Vrms Input/ Output to Ground Isolation 2500 Vrms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80°C Ambient Storage Temperature Range -40 to 100 °C Weight (typical) 13.1 oz (370g) Housing Material UL 94V0 (self extinguishing Input Terminal Screw Torque Range:[in lbs/Nm] 16.8/1.9 Output Terminal Screw Torque Range:[in lbs/Nm] 21.2/2.4 GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) When mounted to the proper size heat sink (see derating curves) 3) Measured between 1/L1 and 2/T1 or 3/L2 and 4/T2 4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1