Радиатор HS251 Crouzet

Технические характеристики: • 28 amp AC output @ 40°C • Single Channel output • 3 to 32 VDC input control voltage • Panel mounted • uL, CSA, VDE, CE approved SSRs PRODUCT SELECTION Description 28 A 28 A 3-32 VDC Control HS251-D2450 HS251-HD6050 OUTPUT SPECIFICATIONS (1) Description HS251-D2450 HS251-HD6050 Operating Voltage (47-63Hz) [Vrms] 24-280 48-660 Transient Overvoltage [Vpk] 600 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 5 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 Maximum Load Current [Arms] 28 28 Minimum Load Current [Arms] 0.04 0.04 Maximum Surge Current (16.6ms) [Apk] 625 1200 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.7 Maximum I²t for Fusing (8.3 msec) [A² sec] 1620 1620 Minimum Power Factor (with Maximum Load) 0.5 0.5 INPUT SPECIFICATIONS (1) Description HS251-D2450 HS251-HD6050 Control Voltage Range 3-32 VDC 3-32 VDC Minimum Turn-On Voltage 3.0 VDC 3.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC Maximum Reverse Voltage 32 VDC 32 VDC Typical Input Current 3.4 mA @ 5 VDC 2.0 mA (3) Nominal Input Impeadance 1500 Ohms See Note 3 Maximum Turn-On Time [msec] 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC) 109 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80°C Ambient Storage Temperature Range -40 to 125°C Status Indicator Display None Weight (typical) 0.41 lb (186g) Encapsulation Themally Conductive Epoxy Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without grease) Thermal pad installed Yes GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter (HD model only)