88867435 Crouzet

Технические характеристики: Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external power supply to the control input 3-wire sensor control option Timing Timing ranges (7 ranges) 1 s - 10 s - 1 min - 10 min - 1 h - 10 h - 100 h TK2R1 : 0.6s - 2.5s - 20s - 160 s Repetition accuracy with constant parameters ± 0.5 % (IEC/EN 1812-1) Drift Temperature ± 0,05 % / °C Drift Voltage ± 0.2 % / V Display accuracy according to IEC/EN 61812-1 ± 10 % / 25 °C Minimum pulse duration typically (relay version) 30 ms Minimum pulse duration typically (solid state version) 50 ms Minimum pulse duration typically (relay version under load) 100 ms Maximum reset time by de-energisation typically (relay version) 100 ms Maximum reset time by de-energisation typically (solid state version) 350 ms Immunity from micro power cuts : typical > 10 ms Supply *** TRADUCTION MANQUANTE *** Multi-voltage power supply Depending on version Frequency (Hz) 50 / 60 Operating range 85 to 110 % Un (85 to 120 % Un for 12V AC/DC) Operator factor 100 % Max. absorbed power 0,6 W 24 V AC/DC 1,5 W 230 V AC 32 VA 230 V AC Output specification 1 or 2 changeover relays, AgNi (cadmium-free) 2000 VA/80 W Rated power 2000 VA/80 W Maximum breaking current 8 A AC 8A DC Minimum breaking current 10 mA / 5 V DC Voltage breaking capacity 250 V AC/ DC Electrical life (operations) 10 5 operations 8 A 250 V resistive Mechanical life (operations) 5x106 Breakdown voltage acc. to IEC/EN 61812-1 2.5 kV /1 min / 1 mA / 50 Hz Impulse voltage acc. to IEC/EN 60664-1, IEC/EN 61812-1 5 kV, wave 1.2 / 50 μs Solid state output Rated power 0,7 A AC/DC 20 °C (0,5 A UL) Derating 5 mA / °C Maximum admissible current 20 A ≤ 10 ms Minimum breaking current 10 mA Leakage current < 5 mA Voltage breaking capacity 250 V AC/ DC Maximum voltage drop at terminals 3 wire 4V - 2 wire 8V Electrical life (operations) 108 Mechanical life (operations) 108 Breakdown voltage acc. to IEC/EN 60664-1, IEC/EN 60255-5 2.5 kV to 1 mA / 1 min Input type Volt-free contact 3-wire PNP output control option residual voltage : 0.4V whatever the timer power supply